Skip to content
Appliance & HVAC care across the East BayAppliance service dealer license A48849
WAVEAPPLIANCE REPAIR (925) 210-0900

Wolf cooktop repair in Walnut Creek and the East Bay

Pancakes brown over the corners of your griddle while the one in the middle stays pale. On an older 36-inch Wolf CI365 induction cooktop, All Bridge switches on four round cooking zones together. There’s a small area in the center between the coils. A pale spot there can happen even when all four zones are working. Wolf’s CI bridge guide.

Send your request. WAVE will call to confirm a time.

Did All Bridge switch off?

Look at where the griddle sat during that meal. On the older CI365, All Bridge needs cookware over each of the four zones. If just one zone was uncovered, the bridge can switch off. On the newer CI36560 with square zones, Wolf does not offer the four-zone All Bridge setting. Check the model before booking service for a control you can’t find. Wolf’s guide to bridge options by model.

When one zone stays cold on its own

If an individual zone also failed during ordinary cooking with a pan that fits it and normally works there, mention that separately. A flashing burner control can mean the cooktop hasn’t detected the pan. A photo showing exactly which light flashed is more helpful than a guess about a failed coil. Wolf’s guide to a flashing induction control.

For independent Wolf cooktop repair in Walnut Creek and the East Bay, send the model and say whether the trouble appeared under a griddle, a single pan or both. Request a cooktop visit.

Questions before you book

What picture would help identify the bridge layout?

A photo of the cold glass showing the marked zones and controls is useful, along with the cooktop model. Include the outline or dimensions of the griddle base so WAVE can see which zones it spans.

Related services and guides

(925) 210-0900 Call us now!