Skip to content
Appliance & HVAC care across the East BayAppliance service dealer license A48849
WAVEAPPLIANCE REPAIR (925) 210-0900

Viking cooktop sparking continuously

A Viking ignition system can spark when a flame needs relighting. Repeated clicking with a stable flame, or sparks when all knobs are off, makes the knob position and recent spill history important.

Send your request. WAVE will call to confirm a time.

Does the cooktop click even after the flame is established?

Turn off the burners and let the surface cool and dry. Note which electrodes sparked and whether the clicking persisted with every control off. Leave the cooktop unused if unexpected sparking continues.

Questions before you book

Should I turn it on again to record the sound?

No. The timing from ordinary use is enough. Describe whether the flame appeared and whether the clicking continued with the control off.

Did the flame go out just before the Viking igniters started clicking?

Viking’s Designer DGVU gas cooktop uses automatic reignition. If a simmering flame goes out while the knob is still on, the igniters can spark to relight it. The guide also notes that all igniters may spark when just one burner is selected.

Report whether a draft or boil-over disturbed the flame and whether the clicking continued after the burner was off. Switch the affected burner off if it keeps losing its flame or sparking. If you smell gas, leave and call 911, then your utility, from a safe location.

Related services and guides

References: PG&E safety guidance.

(925) 210-0900 Call us now!