GE Monogram dishwasher leak or fill warning
A dishwasher that stays dry while attempting to fill presents a different problem from one that starts pumping with water underneath. A leak protection message does not identify the part that leaked.
Send your request. WAVE will call to confirm a time.
Does the Monogram dishwasher report a fill problem or detect a leak?
Record the full message and the cycle stage, then look for external water near the sink and toe kick. Stop operation and close the accessible water supply if it is leaking. Leave the unit in the cabinet for diagnosis.
Questions before you book
Can I tell from the warning which hose or valve failed?
The model and exact message determine what the protection system detected. Inspection is needed to locate the source.
Why did the dishwasher drain as soon as it displayed LEAK DETECTED?
On a Monogram dishwasher equipped with GE's Floor Protect with Alert, moisture in the pan below the tub can cancel the wash and start the drain pump. Hearing the pump run during that alert is part of the protection sequence.
If the message appeared, leave the machine out of use and report any water visible at the front. GE calls for disconnecting power when the dishwasher also beeps. If the panel instead reported a fill problem, send that exact message and say whether water ever entered. Avoid pulling the dishwasher forward to inspect the pan.
