DCS cooktop burner won’t ignite
A single burner may be affected after cleaning while neighboring burners still operate. No ignition at every burner suggests a different situation from a spark visible at one unlit ring.
Send your request. WAVE will call to confirm a time.
Which DCS cooktop burner failed to light?
Return the control to Off after the failed attempt. When cool, check the removable cap against the model’s guide. If you smell escaping gas, leave and call for assistance from outside.
Questions before you book
Should I try a match or lighter?
Use the ignition procedure specified for your model. With a new ignition fault, leave it off for assessment instead of trying to bypass its controls.
Did the DCS surface burner keep clicking after it lit?
A DCS indoor cooktop burner that clicks and never establishes a flame needs a different description than one that lights and continues to spark. Write down the burner position and what happened to the flame when you last used the control.
Leave a burner that fails to light switched off. If you smell gas, leave the area immediately and call 911, then your gas utility, from a safe location. If there was no odor, describe the original attempt and any recent spill. You do not need to repeat the attempt to request an assessment.
Related services and guides
- Appliance brands WAVE serves
- More DCS troubleshooting guides
- DCS burner flame too high or too low
- DCS igniter clicks but the burner won’t light
References: PG&E safety guidance.
