Skip to content
Appliance & HVAC care across the East BayAppliance service dealer license A48849
WAVEAPPLIANCE REPAIR (925) 210-0900

Dacor range repair in Walnut Creek and the East Bay

The burners on your Dacor range cooked dinner, but the oven went back to the clock when you tried to bake. What was the last thing you saw on the oven display? A cooking temperature that disappears after you press Start tells a different story from a temperature that simply takes a while to rise.

Send your request. WAVE will call to confirm a time.

What did Bake look like on your range?

Touchscreen on a DOP36M94D dual-fuel range. Selecting Bake and a temperature sets up the oven. Tapping Start begins the bake. If you tapped Start and the time of day came back, mention whether the whole screen went dark first. If preheating had already begun, tell us how far into it the display changed. The Dacor control-panel guide shows where the mode, temperature, clock and Start button appear.

Two oven knobs on a DOP36P86GLS gas range. One knob selects Bake and the other sets the temperature. While the oven warms up, the temperature display starts changing at 150°F. A readout holding steady early in preheat can be normal on this model. A blank display or the loss of the selected mode is worth reporting separately. See Dacor’s gas-range baking instructions.

When the control resets again

Leave the oven off if it repeatedly drops out of Bake. Use what you saw on the last attempt. Did the range clock need setting afterward? Did any other kitchen clock reset at the same time? Mention whether the burners were already in use. If the controls stayed on throughout and the food came out cold, see the Dacor range heating guide.

Ask WAVE about Dacor range repair if you live in Walnut Creek or a nearby East Bay community. Include the model from your paperwork, any code on the display and your service address so WAVE can confirm it handles that range before scheduling.

Identify the surface before calling it a range

When there are front-facing knobs but only drawers or cupboards underneath, the surface may be a separate rangetop. A range usually has an oven in the same appliance body. If only surface heat failed, give the location of the burner or zone and the surface model if you can see it without moving the appliance. The wall oven label can stay out of this request unless it also failed.

Related services and guides

(925) 210-0900 Call us now!